Norland Optical Adhesive 144

 

 Norland Optical Adhesive 144 is clear liquid adhesive that will cure when exposed long wavelength ultraviolet light. NOA 144 is recommended for bonding for glass to glass. Adhesion is also good to cellulose acetate    

 butyrate. NOA 144 is cured by ultraviolet light between 315 to 395 nm. Full cure requires 6 Joules/cm 2 . The adhesive exhibits oxygen inhibition when used as a coating.  To overcome this the adhesive must be cured   

 under an inert atmosphere, such as nitrogen.

 

 

Typical Properties of NOA 144

 

 

Refractive Index

1.44

Temperature Range

-15 C to 90° C

Viscosity @ 25C

 45-60 cps

                                                                  

 

 Keep NOA 144 in a cool(5-22 ° C) dark place. If refrigerated, allow the adhesive to come to room temperature before using.

 

 Care should be taken in handling the this material. The material Safety Data Sheet should be read for this product.  Prolonged contact with skin should be avoided and affected areas should be washed thoroughly with     

 copious amounts of soap and water. If adhesive gets into eyes, flush with water for 15 minutes and seek medical attention.

 

 

Spectral Transmission of NOA 144

[Click Here To View MSDS Information]

Home - Adhesives - Fiber Optics - Fish Gel - Distributors - About - Trade Shows - Employment -