Norland
Optical Adhesives ** To place an order
click Buy Now |
|
PRODUCT
|
DESCRIPTION
- SIZE
|
View
MSDS |
Shopping
Cart |
|
NOA 60
|
General purpose adhesive for bonding doublets, prisms or mounting components. |
MSDS
|
Buy
Now |
|
NOA 61
|
Preferred adhesive for military optics. Meets MIL-A-3920. Used for optics exposed to temperature extremes. Low shrinkage. |
MSDS
|
Buy
Now |
|
NOA 63
|
Cures well in thick sections. Use as a fillet bond to hold lenses in place or for bonding where low fluorescence or good transmission in UV range is required. |
MSDS
|
Buy
Now |
|
NOA 65
|
Flexible adhesive suitable for low strain applications or for cold blocking of lenses. |
MSDS
|
Buy
Now |
|
NOA 68
|
Flexible adhesive for glass or plastics such as polycarbonate CAB or acrylic. |
MSDS
|
Buy
Now |
|
NOA 71
|
Provides a strong bond to glass surfaces and has excellent clarity for light guides and other applications. |
MSDS
|
Buy
Now |
|
NOA 72
|
Low viscosity adhesive for bonding glass or plastics such as polycarbonate, CAB or acrylic. Cures with UV or visible light. |
MSDS
|
Buy
Now |
|
NOA 73
|
Flexible adhesive with low viscosity for bonding delicate parts. |
MSDS
|
Buy
Now |
|
NOA 74
|
Very low viscosity adhesive used for bonding CAB, glass and other plastics. |
MSDS
|
Buy
Now |
|
NOA 75
|
Low viscosity adhesive used for bonding polarized and polyester film, nylon, glass and other plastics. |
MSDS
|
Buy
Now |
|
NOA 76
|
Recommended for bonding glass to plastic. |
MSDS
|
Buy
Now |
|
NOA 78
|
Recommended for bonding plastic to plastic or glass to plastic. |
MSDS
|
Buy
Now |
|
NOA 81
|
Fast curing adhesive for tacking or bonding. Excellent adhesion to glass or metal. Produces a hard, resilient bond. |
MSDS
|
Buy
Now |
|
NOA 83H
|
Fast curing adhesive that will cure with UV or heat for tacking or bonding UV opaque materials. |
MSDS
|
Buy
Now |
|
NOA 84
|
Low refractive index (1.46) recommended for bonding plastics and glass. |
MSDS
|
Buy
Now |
|
NOA 88
|
Low outgassing adhesive for aerospace or electronic applications. Excellent transmission in UV range. |
MSDS
|
Buy
Now |
|
NOA All Purpose Kit
|
6 one oz. bottles NOA 60,61,63,65,68,81. |
MSDS
|
Buy
Now |
|
NOA Discovery Kit
|
4 one oz. bottles NOA 61, 63, 68, 81. |
MSDS
|
Buy
Now |
Norland
Electronic Adhesives |
|
PRODUCT
|
DESCRIPTION
- SIZE
|
View
MSDS |
Shopping
Cart |
|
NCA 130
|
Single component conductive adhesive for preventing static buildup. Will cure tack free to a tough, resilient polymer when exposed to UV light and heat. |
MSDS
|
Buy
Now |
|
NEA 121
|
Low viscosity adhesive for tacking, filling, sealing and tamper proofing precision components. |
MSDS
|
Buy
Now |
|
NEA 121 Red
|
Useful applications for NEA 121R include wire tacking, chip capacitor bonding, coil termination, bonding of head gimbal assemblies and tamper proofing adjustable components. |
MSDS
|
Buy
Now |
|
NEA 123
|
High viscosity, thixotropic paste for wire tacking, chip bonding and coil terminating. |
MSDS
|
Buy
Now |
|
NEA 123 Blue
|
Blue colored adhesive used for many applications including wire tacking, chip capacitor bonding, coil termination, and tamper proofing. |
MSDS
|
Buy
Now |
|
NEA 123 Green
|
Green colored adhesive recommended for tacking, filling, sealing or bonding precision components or wires in place. |
MSDS
|
Buy
Now |
|
NEA 123 Red
|
Red colored adhesive recommended for tacking, filling, sealing or bonding precision components or wires in place. |
MSDS
|
Buy
Now |
|
NEA 123HGA
|
Low outgassing,thixotropic adhesive used for HGA assembly, wire tacking, wire coating and other applications that are affected by outgassing. |
MSDS
|
Buy
Now |
|
NEA 123K
|
Recommended for applications that require potting, filling or thick sections. |
MSDS
|
Buy
Now |
|
NEA 123L
|
Recommended for sealing, chip bonding and applications that require wicking and thin sections. |
MSDS
|
Buy
Now |
|
NEA 123M
|
Recommended for wire tacking, encapsulating and tamperproofing. |
MSDS
|
Buy
Now |
|
NEA 123S
|
Recommended for wire coating, wire tacking and coil terminating. |
MSDS
|
Buy
Now |
|
NEA 123S Blue
|
Blue colored lower visocity adhesive recommended for wire coating, wire tacking, coil terminating and identification marking. |
MSDS
|
Buy
Now |
|
NEA 123SHGA
|
Low outgassing, lower visocity adhesive recommended for wire coating, wire tacking, coil terminating. |
MSDS
|
Buy
Now |
|
NEA 123T
|
Thixotropic paste recommended for wire encapsulating, coil terminating and potting. |
MSDS
|
Buy
Now |
|
NEA 155
|
Red colored heat curing adhesive for bonding, sealing or potting electronic components. |
MSDS
|
Buy
Now |
|
NEA All Purpose Kit
|
6 six gm syringes NEA 121,123L,123S,123K, 123HGA,123T. |
MSDS
|
Buy
Now |
|
NEA Discovery Kit
|
4 six gm syringes NEA 121, 123L,123K,123HGA. |
MSDS
|
Buy
Now |
Special
Application Adhesives |
|
PRODUCT
|
DESCRIPTION
|
-
View
MSDS
|
Shopping
Cart |
| IML150 |
Low viscosity liquid monomer that can be used as an index matching liquid. This material does not harden. |
MSDS |
Buy
Now |
| NBA 107 |
Single component, UV curing adhesive used for temporary bonding of lenses to metal, glass or plastic polishing mounts. |
MSDS |
Buy
Now |
| NBA 108 |
Single component, UV curing adhesive used for temporary bonding of lenses to metal, glass or plastic polishing mounts. Stronger than NBA 107. NBA 018 is formulated to use when application uses large quantities of liquid or heavy grinding or polishing. Can be debonded with acetone. |
MSDS |
Buy
Now |
| UVS 91 |
Screenable paste for bonding and sealing perimeter of liquid crystal displays. |
MSDS |
Buy
Now |
Light
Sources |
|
PRODUCT
|
DESCRIPTION
To
place an order click Buy Now.
|
NEW
Opticure
LED 1
|
The
Opticure LED 1 is a battery operated, portable
light source that uses a UV emitting LED.
The light emitting diode has a typical
life of 50,000 hours and generates an output
at full power of 1w/cm squared at 365nm.
|
|
| Opticure
4T |
The
Opticure T designed for continuous use on production
lines where small areas of UV adhesive need
to be cured quickly and precisely. |
|
| Opticure
4 |
The
Opticure 4 is designed for use in R&D labs
and small production lines, where small areas
of UV adhesive need to be cured quickly and
precisely. It does not have a timer. |
Buy
Now |
| Polylux
500 |
The
Polylux 500 UV curing chamber is a fully self
contained light source that uses two 9 watt
UV florescent bulbs. |
|
| SB-100P |
The
SB-100P Lamp from Spectronics is a high intensity
black light lamp that is exceptionally rugged
with a Spot Bulb. |
|
| SB-100P-FB |
The
SB-100P Lamp from Spectronics is a high intensity
black light lamp that is exceptionally rugged
with a Flood Bulb. |
|
| Bench
Mount |
The
Spectronics Bench Mount Lamp style XX-15A is
ideal for slow, even cures over a large area. |
|
| Mini
Lamp |
The
UVC Mini Lamp is a portable, battery operated,
UV lamp. |
|
| Splice
Lamp |
The
Splice Lamp is a table top lamp especially designed
for curing the Norland UVC Optical Splice. |
|
| Replacement
Parts and Accessories |
Light Source Replacement Parts and Accessories. |
|
Technical
Reports |
| Age Testing on Norland Optical Adhesive |
| Applying Adhesive |
| Notes on Bonding Holograms with Norland
Optical Adhesives |
| Chemical Resistance of Norland Optical
Adhesive |
| Cure Times of Norland Optical Adhesive |
| Preventing Lens Separations with Norland
Optical Adhesives |
| Separating Lenses Bonded with Norland
Optical Adhesive |
| Techniques In Using UV Adhesives for
Optomechanical Designs |
| Mechanisms Relating to Reducing Stress in
Curing Thick Sections of UV Adhesive |
| Cure Time and Intensity |
