Norland
Optical Adhesives |
|
PRODUCT
|
DESCRIPTION
|
-
VIEW
MSDS
|
Shopping
Cart
To
purchase an adhesive
Click
on the BUY NOW
icon
listed below. |
| NOA
60 |
General
purpose adhesive
for bonding
doublets,
prisms or mounting
components. |
MSDS |
 |
| NOA
61 |
Preferred
adhesive for military optics. Meets MIL-A-3920. Used for optics
exposed to temperature extremes. Low shrinkage. |
MSDS |
|
| NOA
63 |
Cures
well in thick sections. Use as a fillet bond to hold lenses
in place or for bonding where low fluorescence or good transmission
in UV range is required. |
MSDS
|
|
| NOA
65 |
Flexible
adhesive suitable for low strain applications or for cold
blocking of lenses. |
MSDS |
|
| NOA
68 |
Flexible
adhesive for glass or plastics such as polycarbonate CAB
or acrylic. |
MSDS |
|
| NOA
68T |
High
viscosity, flexible optical adhesive for glass or plastics
such as polycarbonate CAB or acrylic. |
MSDS |
|
| NOA
71 |
Provides
a strong bond to glass surfaces and has excellent clarity
for light guides and other applications. |
MSDS |
|
| NOA
72 |
Low
viscosity adhesive for bonding glass or plastics such as
CAB polycarbonate or acrylic. Cures with UV or visible light.
|
MSDS |
|
| NOA
73 |
Flexible
adhesive with low viscosity for bonding delicate parts.
|
MSDS |
|
| NOA
74 |
Flexible
adhesive with low viscosity for bonding delicate parts.
|
MSDS |
|
| NOA
75 |
Low
viscosity adhesive used for bonding polarized and polyester
film, nylon, glass and other plastics. |
MSDS |
|
| NOA
76 |
Medium
viscosity adhesive recommended for bonding glass to plastic.
|
MSDS |
|
| NOA
78 |
Higher
viscosity adhesive recommended for bonding plastic to plastic
or glass to plastic. |
MSDS |
|
| NOA
81
|
Fast
curing adhesive for tacking or bonding. Excellent adhesion
to glass or metal. Produces a hard, resilient bond. |
MSDS |
|
| NOA
83H |
Fast
curing adhesive that will cure with UV or heat for tacking
or bonding UV opaque materials. |
MSDS |
|
| NOA
84 |
Low
refractive index (1.46) recommended for bonding plastics
and glass. |
MSDS |
|
| NOA
86 |
Low
viscosity and meets the Bellcore specifications of 85C/85RH
for 2000 hours. |
MSDS |
|
| NOA
88 |
Low
outgassing adhesive for aerospace or electronic applications.
Excellent transmission in UV range from 320nm to 2000nm. |
MSDS |
|
| NOA
89 |
Norland's
lowest viscosity UV curing adhesive used for bonding glass
to glass or as a coating. |
MSDS |
|
| NOA
Discovery Kit |
Four
one oz. bottles NOA 61,63,68,81. |
|
|
| NOA
All Purpose Kit |
Six
one oz. bottles NOA 60,61,63,65 ,68,81. |
|
|
| |
NORLAND ELECTRONIC ADHESIVES |
|
|
|
PRODUCT
|
DESCRIPTION
|
-
VIEW
MSDS
|
Shopping
Cart
To
purchase an adhesive
click
on the BUY NOW
icon
listed below.
|
| NEA
121 |
Low
viscosity adhesive for tacking, filling, sealing and tamper
proofing precision components. |
MSDS |
|
| NEA
121 RED |
NEA 121 with a red color for wire tacking, chip capacitor
bonding, coil termination, bonding of head gimbal assemblies
and tamper proofing adjustable components. |
MSDS |
|
| NEA
123 |
High
viscosity, thixotropic paste for wire tacking, chip bonding
and coil terminating. |
MSDS |
|
| NEA
123 BLUE |
Blue
colored adhesive used for many applications including wire
tacking, chip capacitor bonding, coil termination, and tamper
proofing. |
MSDS |
|
| NEA
123 GREEN |
Green
colored adhesive used for many applications including wire
tacking, chip capacitor bonding, coil termination, and tamper
proofing. |
MSDS |
|
| NEA
123 RED |
Red
colored adhesive used for many applications including wire
tacking, chip capacitor bonding, coil termination, and tamper
proofing. |
MSDS |
|
| NEA
123HGA |
Low
outgassing,thixotropic adhesive used for HGA assembly, wire
tacking, wire coating and other applications that are affected
by outgassing. |
MSDS |
|
| NEA
123K |
Recommended
for applications that require potting, filling or thick sections.
|
MSDS |
|
| NEA
123L |
Recommended
for sealing, chip bonding and applications that require
wicking and thin sections. |
MSDS |
|
| NEA
123M |
Recommended
for wire tacking, encapsulating and tamper proofing.
|
MSDS |
|
| NEA
123S |
Recommended
for wire coating, wire tacking and coil terminating. |
MSDS |
|
| NEA
123S BLUE |
Blue
colored adhesive recommended for wire coating, wire tacking
and coil terminating. |
MSDS |
|
| NEA
123S HGA |
Low
outgassing, lower visocity adhesive recommended for wire
coating, wire tacking, coil terminating. |
MSDS |
|
| NEA
123T |
Thixotropic
paste recommended for wire encapsulating, coil terminating
and potting. |
MSDS |
|
| NEA
123TK |
Very
high viscosity thixotropic paste recommended for wire encapsulating,
coil terminating and potting. |
MSDS |
|
| NEA
155 |
Red
colored heat curing adhesive for bonding, sealing or potting
electronic components. |
MSDS |
|
| NCA
130 |
Single
component conductive adhesive for preventing static buildup.
Will cure tack free to a tough, resilient polymer when exposed
to UV light and heat. |
MSDS |
|
| |
SPECIAL
APPLICATION ADHESIVES |
|
Shopping
Cart
To
purchase an adhesive
click
on the BUY NOW
icon
listed below. |
| NBA
107 |
Single
component, UV curing adhesive used for temporary bonding
of lenses to metal, glass or plastic polishing mounts. |
MSDS |
|
| NBA
108 |
Single
component, UV curing adhesive used for temporary bonding
of lenses to metal, glass or plastic polishing mounts. Stronger
than NBA 107. NBA 108 is formulated to use when application
uses large quantities of liquid or heavy grinding or polishing.
Can be debonded with acetone.
|
MSDS |
|
| UVS
91 |
Screenable
paste for bonding and sealing perimeter of liquid crystal
displays. |
MSDS |
|
| |
Light
Sources |
|
Shopping
Cart
To
purchase a light source click on the BUY NOW icon
listed below.
|
|
PRODUCT
|
DESCRIPTION
|
-
|
SHOPPING
CART |
NEW
|
The
Multi-Pole LED UV Curing System emits a consistent and repeatable
2.5W/cm squared @ 365nm at each pole. The LED Multipole
Sysytem is equivalent to a 10W/cm squared lamp system using
a 4 pole liquid light guide.
|
|
|
NEW
Opticure
LED 1
|
The
Opticure LED 1 is a battery operated, portable light source
that uses a UV emitting LED. The light emitting diode
has a typical life of 50,000 hours and generates an output
at full power of 1 W/cm squared at 365nm. |
|
|
| |
The
Opticure T designed for continuous use on production lines
where small areas of UV adhesive need to be cured quickly
and precisely. |
|
|
|
The
Opticure 4 is designed for use in R&D labs and small
production lines, where small areas of UV adhesive need
to be cured quickly and precisely. It does not have a timer.
|
|
|
| |
The
Polylux 500 UV curing chamber is a fully self contained
light source that uses two 9 watt UV florescent bulbs. |
|
|
| |
The
SB-100P Spot Lamp from Spectronics is a high intensity black
light lamp that is exceptionally rugged and gives a 2" diameter
cure area. |
|
|
| |
The
SB-100P Flood Lamp from Spectronics is a high intensity
black light lamp that is exceptionally rugged and gives
a 7" diameter cure area. |
|
|
|
The
Spectronics Bench Mount Lamp style XX-15A is ideal for slow,
even cures over a 4" wide by 15" long area.. |
|
|
|
The
UVC Mini Lamp is a portable, battery operated, UV lamp.
|
|
|
| |
The
Splice Lamp is a table top lamp especially designed for
curing the Norland UVC Optical Splice. |
|
|
| Technical
Reports |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
